Doremi Asset Manager Manual do Utilizador

A S S E T M A N A G E RSoftwareUser ManualVersion 2.2The Asset Manager manual complies with the following products:Doremi Asset Manager Version 5.2.x;

Figure 3: About Window Registration Key 2.3 Tool bar Icon DescriptionDoremi Asset Manger runs as a service indicated by an icon (green circle) in th

Note: Because hard drive transfer times can be a bottleneck, to get the fastest DoremiAM station, use faster hard drives such as SATA or eSATA instead

Figure 6: “Options” Window – General TabFigure 7: “Browse For Folder” Window__________________________________________________________________________

Figure 8: “Please Select database type” WindowFigure 9 “Choose database type” WindowThe Database type for each folder is indicated directly below t

• Click “Select Folder,” the folder will then appear in the Drop-In window (see Figure 10).• Clicking “Apply” will automatically import the files in t

3 Using Doremi Asset ManagerTo launch the Doremi Asset Manager GUI, right-click on the Green circle Icon in the task-bar and select “Show Doremi A

3.2.1 Device ManagerThe Device Manager will help you manage the devices that are connected to DoremiAM. The Device Manager allows you to easily man

Figure 13: “New group” WindowTo add a new device, click on the “New Device” button as seen in Figure 12 above. The New Device window will appear; ente

• The “Device Network Configuration” window (see Figure 16) will show you the current settings.• Type in the desired IP address, Subnet Mask and Gatew

Finding the IP Address of the V1• Go to OPTION+MENU (00).• Press the ++ button until “IP xxx.xxx” is displayed.• These are the first two octets of the

Table of Contents 1 INTRODUCTION...5

• Clicking on the “++” or “--” buttons allow you to step through the clip frame by frame.• You can keep the “Locate” window open while using the trans

3.2.3.1 Clip List Tab OverviewThis tab provides the list of clips present on the selected device:Figure 20: “Clip List” Sub-TabClip-List Functions:

3.2.3.1.1 The V1 Clip ListWhen connected to a V1 unit, the “Clip-list” sub-tab provides one additional “Create file” option at the bottom.Note: The

3.2.4 Info TabNote: Depending on the type of device you have connected (e.g., Nugget, V1-HD, V1-UHD), the contents of the “Info Tab” will vary.The

Figure 24: Timecode Offset Window• Audio Delay: Enabled for Nugget devices only. Allows you to set the file audio offset that can be used to synchroni

3.2.5 Device Settings WindowThe “Device Settings” window allows you to view and make changes to the parameters and configuration settings of the de

Figure 26: Nugget Device Settings Window“Device Setting” functions when using a Nugget unit:• To save the changes you have made to the unit, click “Ap

How to use the “Device Settings” option when connected to a V1 unit:From the Info Tab of the Doremi AM GUI clicking the Device Settings button will br

Figure 28: Expert V1 Device Settings Window“Device Settings” functions when using a V1 unit:• Each tab has its own set of “Refresh” and “Commit” butto

3.2.5.1 Logo OverlayThe logo overlay allows you to choose a logo that can be displayed on the SDI output only (not on the DVI output). This functio

3.5.5 The Pre-Defined Profiles...58 3.5.6 The Default Profi

How to create a new Logo for a Nugget or Nugget Post:• Go to the DoremiAM GUI and select the “Device” menu.• From the Device menu, select Logo Manager

• From the “Device Playlists” sub-tab, click the “Send” button (see Figure 33).• You will be prompted to choose a playlist/file from your computer.• D

Editing the playlist:• To move a clip up or down in the “Playlist Edit” window (see Figure 31), select the clip in the “Playlist clips” sub-tab and hi

Figure 32: Playlist Generation and Editing for the V1_____________________________________________________________________________________AMR.OM.00016

Figure 33: “Playlist” Sub-Tab Nugget_____________________________________________________________________________________AMR.OM.000163.DRM Page 34 Ver

Figure 34: Playlist Sub-Tab V1_____________________________________________________________________________________AMR.OM.000163.DRM Page 35 Version

3.2.7 Doremi Asset Manager DatabaseAll media files are imported to the DoremiAM database before they are transferred to the units (e.g., Nugget or

Figure 36: “Properties” Window 3.2.7.2 3D MergeThe 3D Merge feature allows you to create a 3D database clip using two existing 2D clips. The 3D merg

Figure 37: “3D – Files Assignment” Window• After pressing Ok on the “3D Assignment Window” the “3D Merge settings” window will appear (see Figure 38)

Note: Make sure to define valid IN and OUT points for the left eye clip, otherwise you will not be able to complete the following steps.• You must def

Software License AgreementThe software license agreement can be found at the following location:http://www.doremilabs.com/support/cinema-support/cinem

3.3 Transferring Files to the Device (Nugget or V1) You can transfer files directly to the device using Windows Explorer, Drag and Drop, Drop-in fo

Figure 41: “Send to Doremi Devices” Window_____________________________________________________________________________________AMR.OM.000163.DRM Page

Figure 41 above is an example of a folder/clip being transferred from the database to a specific device. The green check-mark indicates that the selec

Figure 42: Clip Transfer Progress 3.3.3 Using the Drop-In FoldersIf you have already enabled one or more Drop-in folders from the Options menu, you

3.4.1 Using Windows Explorer to Add Files to the DatabaseHow to add files to the database using Windows Explorer:• Select one or more media files u

Figure 44: Doremi AM Transfer Floating Windows• The Summary window displays information about the source file and the current encoding parameters sele

• Each clip in the source list can have a different profile or different encoding parameters applied to it.Figure 46: Source List Window• The Profile

Figure 48: Profile and Encoding Options Window Encoding Options NuggetFigure 49: Profile and Encoding Options Window Encoding Options V1-UHD• When imp

3.4.2 Using the Drop-In Folders to Add Files to the DatabasePlace media files in the Drop-in folders and they will be automatically imported to the

Figure 51: Drop-Box options – WindowsFigure 52: Drop-Box options – Mac 3.4.4 Using DoremiAM to Add Files to the DatabaseHow to add files to the data

1 IntroductionDoremi Asset Manager simplifies the selection and Ethernet transfer of video files such as Quick Time, MXF, AVI, and WMV to the Nugge

Figure 53: Updated “Clip database” TabFilter Options:DoremiAM allows you to “filter” through clips that have been transferred to your V1 or Nugget dat

Figure 54: “Clip List” Window when Connected to a Nugget_____________________________________________________________________________________AMR.OM.00

Figure 55: “Add to Doremi Database” WindowV1 Specific: When Adding Files from the V1 to the DatabaseWhen using a V1 device to add files to the databas

Figure 56: “Trimming” Window when Connected to a V1 Unit_____________________________________________________________________________________AMR.OM.00

3.5 Transferring Video FilesDoremiAM can be used to transfer popular video formats like Quick Time, AVI, MXF, etc., into the supported Doremi Devic

3.5.1 Doremi Asset Manager Supported File Formats and Codec'sThis paragraph provides a list of file formats supported by the Doremi AM applica

3.5.2 ProfilesA profile defines the compression parameters that will be used to import Audio/Video Media Files. You can define multiple profiles wi

How to Edit an existing profile:• Go to the File Menu and Select “Profiles.”• Select an existing profile and Click on the “Edit” button (see Figure 57

Figure 58: Profile Manager – Encoding Options Tab Nugget 3.5.4 Using ProfilesYou can use the profile you want during an import or transfer by selec

3.5.7 Generating Side/Side and Top/Bottom 3D FilesBeginning with the 4.4.x version of DoremiAM, Nugget users can generate 3D side/side or top/botto

1.2 Database Notice:*************************************************************************************The database structure for this version of

Figure 59:Stereoscopic Options Tab – Nugget 3.5.9 Nugget and V1 Special FeaturesThis paragraph highlights some of the important features of each dev

3.5.9.4 Nugget + Dimension-3DCombining the Nugget-Pro with a Dimension-3D will make for a low cost high definition 3D server that supports most pop

Audio DubbingTo add audio channels to an existing clip, select the clip from the “Clip database” tab and click on the “Audio Dubbing” button.• The “A

Figure 62: Adding Audio Channel(s) from the Database – Clip Selection• Select the clip you want to use and click OK.• Once you have selected either th

• Click on the “Create audio dub task” button at the bottom of the window to update the clip with the new audio tracks.Figure 64: Audio Dubbing Window

Figure 65: Transfer Options 3.8 Tasks ManagementTab OverviewThe “Tasks” tab displays the task list status and the associated log information (see F

Figure 66: Tasks Tab - Tasks List WindowTask InformationTo open a text file containing all the log information associated to a task, select the task i

A task can fail to import for many different reasons:• Unsupported resolution: See “Supported Resolutions” (see Section 7.1 ).• Video Format or Codec

3.9 Setting the Nugget Date and Time• In the Device Manager select the Nugget to set the date and time on. Figure 67: Device Manager• From the Devi

Figure 68: Device MenuFigure 69: Date & Time Window3. Type in the desired date and time or press the “Synchronize with PC” button to set the Nugge

1.5.1.1 To Find the IP Address of the V1• Go to OPTION+MENU (00).• Press the ++ button until “IP xxx.xxx” is displayed.• These are the first two oc

4 The Advanced MenuThe advanced menu was added in DoremiAM version 2.3.36 to provide useful tools for programmers and developers. 4.1 Device Stat

How to Send and test specific Commands (See Figure 71 above):• Command Field: If you know the full command, you can just type it here. Do not include

5 Firmware UpgradeThis section describes how to perform a firmware upgrade of both the Nugget and V1 5.1 Upgrading the Nugget Firmware and NUG-SD

Note: Nugget firmware files will start with “nugget” while NUG-SDI firmware files will start with “fpga.”• Once you have selected the appropriate firm

5.2 Upgrading the Firmware of the V1Starting with Doremi Asset Manger version 5.2.0 the V1 firmware upgrade utility is included with the applicatio

Figure 77: VUPloader Utility• From the File menu of the VUPloader utility select Open.• Browse for the appropriate firmware .bin file and press Open.N

6 Final Cut Pro Plug-In (Mac Only)Starting with Doremi Asset Manager 5.2.0 a Final Cut Pro Plug-in has been implemented for Mac users. The Plug-In

• This will bring up the Doremi Media Export plug-in window.• Select the appropriate Video Codec for the database type you are using. The clip will be

Figure 82: FCP Plug-In MPEG2 OptionsFigure 83: FCP Plug-In Uncompressed Options_______________________________________________________________________

Figure 84: FCP Plug-In JPEG2000 Options• Use the Scaling options tab to apply any scaling to exported clip.Figure 85: Scaling Options• When you are fi

Figure 1: Setting Jumbo Packets 1.6 Release NotesAlways refer to the release notes attached with the DoremiAM software package for most recent featur

7 Supported ResolutionsDoremiAM works with different types of Doremi devices: Nugget (Nugget Post) and V1( V1-HD, V1-UHD and V1-UHD/LE).Each type o

Frame RateVideo Height23.98 24 25 29.97 30 50 59.94 60240 480p 23.98 ↨1080p 23.98480p 24 ↨1080p 24480p 29.97 orNTSC480p 30 ↨1080p 3

Description of Supported Formats above:• The formats highlighted in yellow and in italic denote non-standard video formats that cannot be played by th

7.2 V1 Compliant Video FormatsWhen using DoremiAM with a V1-HD, V1-UHD or V1-UHD/LE unit, make sure that the video format will be compliant with on

8 Document Revision HistoryDate Version Description03/29/2007 1.0 First version.07/31/2007 1.1 Version 1.103/14/2008 1.2 Version 1.205/16/2008 1.3

2 Doremi Asset Manager Set Up 2.1 InstallationHow to install the DoremiAM application:You can download the latest version of Doremi Asset Manager